UNIT WEIGHT: 27in: (27 lbs) 33in (32 lbs) WEIGHT CAPACITY PER SHELF/TIER: 15 LB Bookcase
Fastening System Each design utilizes a simple & effective fastening system to quickly assemble your unit. To reduce assembly time, each fitting (connector) has pre-installed set screws (spare set screws are provided) at EACH pipe entry location. Set screws are tightened using a 1/8” Allen Key, which safely secures the pipe in place.
VARIES (27" OR 33") VARIES* (23" OR 29") 12.00" 8.94" 1.81" 12.60" 10.79" 12.60" 10.79" 68.34" 10.79" 0.81" 17.
DISCLAIMER: We intend to make this instruction manual accurate and complete. However, we make no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
[x1] Bottom Right Leg Assembly [x3] Right Support Assembly [x1] Bottom Left Leg Assembly [x3] Left Support Assembly 4 3 2 1 [x1] Top Right Support Assembly 5 [x1] Top Left Support Assembly [x4] Shelf 7 6 NOTE: SMALL ADJUSTMENTS MAY BE NEEDED ON SUBASSEMBLIES DUE TO SHIPPING MOVEMENT 5
[x4] Ø8mm X 40mm lg.
9 1 We recommend laying furniture down on the floorfor a safer 9 assembly process.Pictures are for reference 7 purposes only! HAND TIGHTEN ALL CAPS [x8] 3 4 9 9 7 3 4 9 9 7 4 9 3 9 7 1 2 USE PART 10 TO TIGHTEN ALL NEW CONNECTIONS [x8] MAKE SURE TO TIGHTEN ALL AREAS! Note: For Ease of Assembly, assemble laying down as shown. Protect floor from being scratched by pipe.
2 12 6 USE PART 10 TO TIGHTEN ALL NEW CONNECTIONS 5 MAKE SURE TO TIGHTEN ALL AREAS! 8
3 IMPORTANT: TO INSURE PROPER AND SAFE INSTALLATION OF YOUR SHELF; YOU MUST: 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL LINING AT LEAST ONE SIDE UP WITH A STUD. 2. LIGHTLY MARK YOUR WALL USING A PENCIL IN EACH MOUNTING HOLE ON THE FLANGES. 3. REMOVE UNIT FROM WALL AND PREDRILL YOUR 4 MARKED SPOTS USING A 3 " DRILL BIT 16 IF NOT GOING DIRECTLY INTO STUD, USE ANCHOR (ITEM 13). DRILL 5 " HOLE AND HAMMER 16 ANCHOR INTO PLACE. 4.
WARRANTY Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood -1 Year Limited WarrantyAll metal finishes and other parts and components, excluding wood, are warranted to you, the original retail purchaser, for a one-year period starting from the date of purchase, to be free from material manufacturing defects.
