Installation Manual

a. Blade bracket hardware (11 screws)

b. Blade attachment hardware (16 screws)

c. Electrical hardware and Balancing kit

(3 plastic wire connectors, blade balancing

kit )

d. Mounting hardware (1 rubber gasket)

7. Blade Brackets (5)

8. Switch Cup Adaptor

9. Light Kit

10. Wire Shade

11. Transmitter and Receiver

1. Mounting Plate (inside canopy)

2. 6” Ball/Downrod Assembly (hanger pin

and locking pin pre-attached)

3. Canopy with Canopy Ring (attached)

4. Decorative Motor Collar Cover

5. Fan Motor Assembly

6. Blades (5)

2. Unpacking Your Fan

Unpack your fan and check the contents. You should have the following items: