Installation & Assembly

6LT PENDANT LIGHT
ASSEMBLY/INSTALLATION INSTRUCTIONS
installation.
shock.
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
referencing the illustrations on the installation instructions.
Phillips screwdriver.
CAUTION
GENERAL
TOOLS REQUIRED
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
Turn off the power at fuse or circuit breaker.
Turn on the power at fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
1. Attach the NIPPLE to the MOUNTING BAR, then secure it with a WASHER and HEX NUT.
2. Attach the MOUNTING BAR to the OUTLET BOX by using two MOUNTING SCREWS.
3. Secure the TOP LOOP to the NIPPLE.
4. Install the
FIXTURE FINIAL to IRON RACK.Then,install the FIXTURE into IRON RACK.
5. Choose the length of the CHAIN you need, then weave the FIXTURE WIRE and the FIXTURE
GROUND WIRE through the CHAIN, COLLAR and CANOPY.
6. Open the top and bottom section of the CHAIN using a phillips screwdriver (not included) and pliers
(not included), then attach it to the LOOP. Close the CHAIN.
7. Thread the FIXTURE WIRE and FIXTURE GROUND WIRE through the TOP LOOP, NIPPLE and
MOUNTING BAR.
8. Pull out the SUPPLY WIRES and SUPPLY GROUND WIRE from the JUNCTION BOX. Make wire
connections using the WIRE CONNECTORS:
---Attach the FIXTURE GROUND WIRE to the MOUNTING BAR with the GREEN GROUND
SCREW. Then connect it to the SUPPLY GROUND WIRE with a WIRE CONNECTOR.
Carefully put the wires back into the JUNCTION BOX.
9. Attach the CANOPY to the MOUNTING BAR by inserting the TOP LOOP, then secure it with the
COLLAR.
10. Install BULBS(not included). See relamping label at socket area or packaging for maximum allowed wattage.
Please read carefully and save these instructions, as you may need them at a later date.
JUNCTION BOX
MOUNTING SCREWS
WIRE CONNECTORS
CROSS BAR
NIPPLE
TOP LOOP
COLLAR
CHAIN
FIXTURE FINIAL
FIXTURE
BULB
（
not included）
IRON RACK
B
C
A
CEILING PLATE
WASHER
LOCK NUT