ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A warning: 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTION PARTS IDENTIFICATION: {S) MIDDLE DRAWER BOTTOM PANEL 1PC (U) CROSS BAR 1PC J {T) METAL FRAME Sa PCS z HARDWARE PACKAGE NO | DESCRIPTION FIGURE QTY |[NO| DESCRIPTION FIGURE QTY 1 | GLUE 40g 1PC | 8 | Saran ® 38 PCS 2 | WOODEN DOWEL SPCA | 9 | kos apes #8x30mm KNOB BOLT 3 | CAM BOLT ¢7x35 5mm PCs | 10 428mm PCS 4 | CATALOG #15x12mm PCS | 11 | BOLT M6x20mm 16 PCS 5 | SCREW #4 Sxd2mm 16 PCS | 12 | BOLT Méx44mm PCS 6 DRAWER SCREW #4.
ASSEMBLY INSTRUCTION INCORRECT o CORRECT ‘Apply glue on all wooden dowels to ensure integrity of the structure.
ASSEMBLY INSTRUCTION STEP 2: = @ x18 ‘Apply glue on all wooden dowels 10 ensure integrity of the structure. STEP ‘APP glue on all wooden dowels ensure integrity of the structure.
ASSEMBLY INSTRUCTION STEP 10-1 : ~ STEP 10-2 Apply glue on all wooden dowels to ensure integrity of the structure.
ASSEMBLY INSTRUCTION STEP 11-1 : STEP 11-2: "Apply glue on all woods | © dowels H to ensure integrity of the structure.