Quick Start Owner manual

ManualsBrands2N ManualsAccessories communicationAnalogue UMTS gateway 2N EasyGate UMTS USB

EasyGateUMTSDataquickinstallationguide

Thisinstallationguidecanbeusedforeasydriversinstalling,modemconfigurationaInternetoptions 

settingsusingEasyGate UMTSData.InsertedscreenshotsillustratethesettingsinWindowsXPENG,

settingsinotherversionsofWindowssystemisalmostsame.

EasyGateUMTSDataconnectionadriversinstallation

1)InserttheUSIMcardintotheEasyGateUMTSData(followtheManualonCD)

2)ConnecttheEasyGateUMTSDatawithYourPCusingA‐BUSBcable.

3)Connectthegatewaytosupplyadapter(usetheoriginaladapter).

4)IfYourPCisnotturnedon,turniton.



5)MakesureYouhavedirectorywithEasyGateUMTSDatadriversincludingfollowingfiles:

modem.sys

oem28.inf

oem30.inf

telitusb.inf

telitusbser.sys

DriverstakeplaceontheincludedCDindirectoryData\EasyGate\Modemdriver.ThefileEasyGate

3GUSBModemDrivers.zipisnecessarytounzipinsomewhereinYourPCbeforeinstallation.



6)IffindingofnewhardwarecomponentsisturnedoninYourPC,Windowsfindautomaticallythe

newhardwareanddisplayfollowingwindow.ChooseYoudon’twanttoconnecttoWindowsUpdate

Webandclick“Next”.IffindingofnewhardwarecomponentsisturnedoffinYourPC,skip

topart

13).



7)Infollowingwindowchoose“Installfromalistorspecificlocation“andclick“ Next”.

Summary of content (9 pages)

PAGE 1
EasyGate UMTS Data quick installation guide This installation guide can be used for easy drivers installing, modem configuration a Internet options settings using EasyGate UMTS Data. Inserted screenshots illustrate the settings in Windows XP ENG, settings in other versions of Windows system is almost same. EasyGate UMTS Data connection a drivers installation 1) Insert the USIM card into the EasyGate UMTS Data (follow the Manual on CD) 2) Connect the EasyGate UMTS Data with Your PC using A‐B USB cable.
PAGE 2
8) Choose the options as shown in the screenshot and click “Browse“ to set the directory path to modem drivers You copy in part 5) 9) If warning window is displayed choose „Continue Anyway“
PAGE 3
10) The modem is properly installed, choose “Finish“ 11) During installation 3 new hardware items are found and have to be installed. For all items use the procedure described up. After installing all new hardware items following is added to device manager (Control panels ‐>System‐>Hardware‐>Device manager): Telit HSDPA USB Modem Telit Auxiliary Port Telit Diagnostics Interface Device manager with these hardware items is shown down. The numbers of COM ports can differ.
PAGE 4
12) If finding of new hardware components is turned off in Your PC, open Control panels ‐>System‐ >Hardware‐>Device manager. You will see three items with yellow exclamation mark. If there are more than three, there are other devices in Your PC without drivers.
PAGE 5
13) Click with right mouse button on any marked item and choose Actualize the software driver. The window as in part 6) should display. Skip to part 6). Actualize the drivers for all three marked items. Following this procedure You should install all three hardware items described in part 10). Modem configuration After successful modem installing it is needed to configure the modem accordance with Your operator or internet provider.
PAGE 6
17)In following window of “New connection Wizard” click “Next” and then choose “Connect to the Internet”. 18) Choose „Setup my connection manually“ and click „Next“.
PAGE 7
19)Choose „Connecting using dial‐up modem“ and click „Next“. 20) If more modems are installed on Your PC in following window choose Telit HSDPA USB Modem. 21)Choose the name of Your internet connection. It will be displayed in Your PC. 21) Fill in the telephone number for specific service accordance with Your operator or ISP. For O2 CZ and some other operators *98# works for GPRS or HSDPA Internet connection.
PAGE 8
22)Check the operator’s or ISP’s instructions to fill up the user setting. 23) Finish the New Wizard connection. The connection is now accessible from Control panels‐ >Network Connections. 24)In last dialog click “Dial”. If modem is installed end configured properly You should connect to The internet. The speed of connecting to internet and the internet connection depends of the service You are using and the operator or ISP network.
PAGE 9