User guide
372N TELEKOMUNIKACE a.s., www.2n.cz
®
3.2.4 Log
The tab provides information on the access card was applied, ( Log when who card
) used the card and on which the card was tapped. You can filter the recordsID device
using a below the information table. The users assigned to the filter 2N Attendance
®
database are displayed on this tab only. Refer to System 2.3 2N Helios IP
®
for details on user database generating. The table includes theManager Settings
following columns:
Time – shows when the user access card was applied.
– the field is coloured in the case of IN event, otherwise it is empty. IfCheck In
the device from which the event was loaded is in a combined mode, the field
contains a minus sign.
– Check Out the field is coloured in the case of OUT event, otherwise it is
empty. If the device from which the event was loaded is in a combined mode, the
.field contains a minus sign
User – displays the user name assigned to the card ID.
Card number – displays the ID of the card applied. Some card readers register a
limited count of card Id characters and so the works2N
®
Attendance System
with the last six characters only in that case.
Device – displays the name of the device on which the access card was tapped.
The device name corresponds to the name in the 2N Helios IP Manager
®
.
View of TabFigure: Log
Note
If more records are included in the system, use the controls below the
table to switch between pages.
Tip
Use the filter below the table to find a record more quickly.