SDS

Page 3 of 5
not in use. Keep out of the reach of children. Do not puncture, crush or incinerate containers, even when
empty.
Conditions for Safe Storage: Store in a cool, well-ventilated area, away from incompatible materials. Do not
store above 120F or in direct sunlight. U.F.C (NFPA 30B) Level 3 Aerosol. Store away from oxidizers.
8 – Exposure Controls/Personal Protection
Chemical
Occupational Exposure Limits
LVP Petroleum Solvent
1200 mg/m3 TWA (manufacturer recommended)
Poly(dimethylsiloxane)
None Established
Carbon Dioxide
5000 ppm TWA, 30,000 ppm STEL ACGIH TLV
5000 ppm TWA OSHA PEL
Additive
None Established
The Following Controls are Recommended for Normal Consumer Use of this Product
Appropriate Engineering Controls: Use in a well-ventilated area.
Personal Protection:
Eye Protection: Avoid eye contact. Always spray away from your face.
Skin Protection: Avoid prolonged skin contact. Chemical resistant gloves recommended for operations
where skin contact is likely.
Respiratory Protection: None needed for normal use with adequate ventilation.
For Bulk Processing or Workplace Use the Following Controls are Recommended
Appropriate Engineering Controls: Use adequate general and local exhaust ventilation to maintain
exposure levels below that occupational exposure limits.
Personal Protection:
Eye Protection: Safety goggles recommended where eye contact is possible.
Skin Protection: Wear chemical resistant gloves.
Respiratory Protection: None required if ventilation is adequate. If the occupational exposure limits are
exceeded, wear a NIOSH approved respirator. Respirator selection and use should be based on contaminant
type, form and concentration. Follow OSHA 1910.134, ANSI Z88.2 and good Industrial Hygiene practice.
Work/Hygiene Practices: Wash with soap and water after handling.
9 – Physical and Chemical Properties
Appearance:
Colorless liquid
Flammable Limits:
(Solvent Portion)
LEL: 0.6% UEL: 4.9%
Odor:
Mild petroleum odor
Vapor Pressure:
Not established
Odor Threshold:
Not established
Vapor Density:
Not established
pH:
Not Applicable
Relative Density:
Not Determined
Melting/Freezing Point:
Not established
Solubilities:
Insoluble in water
Boiling Point/Range:
227-253°C (441-487°F)
(LVP Petroleum Solvent)
Partition Coefficient; n-
octanol/water:
Not established
Flash Point:
96°C (205°F) (LVP
Petroleum Solvent)
Autoignition
Temperature:
Not established
Evaporation Rate:
Not established
Decomposition
Temperature:
Not established
Flammability (solid, gas):
Flammable Aerosol
Viscosity:
Not established
VOC:
0.63%
Pour Point:
Not established
10 – Stability and Reactivity
Reactivity: Not reactive under normal conditions
Chemical Stability: Stable
Possibility of Hazardous Reactions: May react with strong oxidizers generating heat.
Conditions to Avoid: Avoid heat, sparks, flames and other sources of ignition. Do not puncture or incinerate
containers.
Incompatible Materials: Strong acids, alkalis, oxidizers, and amines.