Instruction Manual

24 •
••
• Setup and Utility Menus
D-NET R ECEIVER E CHO
Setting this parameter ON configures DigiCart/E to re-transmit D-Net data as it is received. This is
useful when DigiCarts are daisy-chained.
P LAY D IGITAL F ORMAT
• PROFESSIONAL FORMAT
• CONSUMER FORMAT
The DigiCart/E can output audio on all output connectors simultaneously. The digital outputs can output
data in one of two selected formats. The PLAY DIGITAL FORMAT menu sets the format of the digital
audio at the outputs.
The Professional Format setting will provide an AES/EBU signal at the XLR-3M digital output connector,
and an AES/SMPTE 75 ohm signal at the BNC digital output connector.
The Consumer Format setting will provide an IEC-958 Type II signal at the BNC connector. The XLR
outputs should not be used when the CONSUMER output is selected.
Recordings are not copyright protected when output in the consumer format.
P LAY H OT K EYS U SING
• LOCAL ASSIGNMENTS
• NET DRV ASSIGNMENTS
As a new feature in DigiCart/E, Hot Key assignments can be stored and recalled in two ways, either
Network Drive or Local. The PLAY HOT KEYS USING parameter controls the default behavior for Hot
Key assignment lists.
If this parameter is set to “Net Drive”, DigiCart/E will use the Hot Key list on the currently selected
network drive. While set to play Hot Keys from a network drive, if the current drive selection is changed to
a local drive, the Local Hot Keys list will automatically become active.
If the PLAY HOT KEYS USING parameter is set to “Local Assignments”, the Local Hot Keys list will
always be used, regardless of the current drive.
P LAY R ESTART M ODE
• ON COMPLETION
• IMMEDIATE
While one cut or Playlist is playing, you can choose other selections for playback. Restart Mode determines
whether DigiCart/E will discontinue playback of the current cut and begin playback of the next selected cut
immediately when PLAY is pressed, or wait to begin playback when the current selection has completed.