User guide

58 • Operating Instructions DigiCart/II Plus Owner's Manual
1. Press stack DIR. The screen will show:
FIND STACK S
HH:MM:SS 48K AC-2
Information on the bottom line pertains to the currently selected cut.
2. Press the gray number keys for the desired stack. The screen will show:
FIND STACK .S(NUMBERS PRESSED)
HH:MM:SS 48K AC-2
3. Press ENTER. The screen will show information about the newly selected stack.
4. Press PLAY to play the stack or enter it into a Compound Stack (See CHAPTER
FOUR: Stack Mode). Repeat as necessary for Follow-On Play.