Manual

page 26 Instant Replay Owner’s Manual
If the STOP or CANCEL buttons are pressed, the operation continues but the display shows:
QUIT RESTORE?
PRESS ENTER/CANCEL
If you press ENTER the restore discontinues and an ending summary is displayed.
If you press CANCEL or STOP at the prompt to QUIT the display reverts to updating the file
number and percentage complete and the restore operation continues.
4. After the ending summary you are prompted to press ENTER. The machine resets itself and
restarts as it does when power is first applied.
File Transfer Procedure (SENDER)
1. Select a cut.
2. Select the FILE TRANSFER menu. The top line will show:
TRANSFER CUT
The bottom line displays:
PRESS ENTER/CANCEL
Press ENTER to proceed. Or use the SCROLL ARROWS to select the TRANSFER ALL CUTS
menu item and press ENTER to proceed.
3. Press ENTER and the display will show:
DESTINATION NAME
POST RM#1
(This is the most recently used destination name.)
Optionally, press ENTER to edit the Destination Receiver name. When the name is blank the
display indicates '(NONE SPECIFIED)' and the transfer can be received only by machines
that have a blank receiver name.
4. Push the down arrow and the display shows:
DESTINATION LOCATION DESTINATION LOCATION
MAIL BOX (OR) 1.0001 (SELECTED CUT)
depending on which type of destination was most recently selected. The Destination Location
can be changed by pressing ENTER, followed by the up or down arrows, to select between a
specific location and the mail box. The selection blinks until you press ENTER again to
confirm.
Press ENTER again when MAIL BOX is displayed to select the mail box as the destination
location.
Alternately, press ENTER when a another specific location is displayed to select that
location. Portions of the location field that are not applicable for a particular type of transfer
are displayed as X's: