User Manual

MAXX-2420-EX Owner’s Manual Page 115

Maintenance

Fault Diagnostics

Front Panel Indicators

The five LED indicators on the front panel are used to diagnose server fault conditions. The

meaning of each indicator is noted in the following table. During normal operation, all five

LEDs will be on.

GENLOCK OFF indicates that the Genlock

setting in the System menu is

“Internal”

FLASHING indicates that Genlock is

selected in the System menu, but

there is no signal, or an invalid signal,

at the GENLOCK input connector.

Check the Genlock setting in the On-

Screen System menu.

Check the Genlock cable connections

or signal.

POWER FLASHING indicates that there is a

fault in the system power supply.

Shut down the server and contact 360

Systems Customer Support for further

hardware diagnosis.

FANS FLASHING indicates that an internal

chassis or CPU fan is running slow or

stopped.

Check the chassis fan operation.

Replace if necessary. Do not run the

server without a working fan.

DRIVES FLASHING indicates that there is a

fault in the system RAID array.

Check the RAID array status using

the utility under

Start >Raid Status.

SYSTEM FLASHING indicates that the CPU or