User Manual

MAXX-2420-EX Owner’s Manual Page 33
The Transport Channel View
The Transport Channel View is shown in Figure 6. This is the default view of each channel. Basic
transport operations such as play, stop, record, and head/tail trimming appear in the Clip
Transport window for each channel. These operate in familiar VTR fashion.
Figure 6 - Transport Channel View
Transport Menu Bar
There are two menus, File and Options.
File Menu
New
Channel 1 and 2 only. Opens the Clip Navigator to allow naming of a new clip, then prepares
channel 1 or 2 for recording. See page 37.
Key Command –
Ctrl+N.
Open
Opens the Clip Navigator to allow choosing a clip to load into the transport.
Key Command –
Ctrl+O.
Save
Saves an edited clip using its existing file name.
Key Command –
Ctrl+S.