Manual

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page

PRESET OPERATIONS

The PRESET function lets you assign a Cut or Linear Stack to the 16

PRESET buttons on the RC-210. When assigned, the selection will PLAY

immediately when you press the associated Hot Key, or PRESET.

The terms Hot Key and PRESET are used interchangeably in this manual.

There are certain important conditions that apply when working with

PRESETS:

• All Cuts (and Cuts contained in Stacks) assigned to

PRESETS must be recorded in the Dolby AC-2 format.

• All Cuts (and Cuts contained in Stacks) assigned to

PRESETS must be stored on the hard disk.

• PRESETS are subject to the currently selected RESTART

MODE under the SETUP MENU — IMMEDIATE or ON

COMPLETION.

ASSIGNING PRESETS

1. Press the ASSIGN PRESET button on the Remote Control.

The display will show:

X.XXXX (Name)

SELECT PRESET

Note: The information on the top line refers to the

currently selected Cut or Stack.

2. SELECT or FIND a Cut or Linear Stack on the hard disk.

3. Press the PRESET key you wish to assign.

NOTE: It is not necessary to Clear a PRESET before reassigning it.

4. Repeat steps 2 and 3 as necessary.

5. Press CANCEL to exit the ASSIGN PRESETS function.