Owner manual

TCR Series User's Guide Machine Setup 5-27
Recall Machine Setup
MENU | Machine Setup | Recall Machine Setup
The Recall Machine Setup Menu allows you to load one of ten stored machine setup configurations.
Configurations are stored in non-volatile memory using the Store Machine Setup Menu. Refer to
the “Store Machine Setup” section for details.
To reach the Recall Machine Setup Menu, select Recall Machine Setup (item 5) on the Machine
Setup Menu.
RECALL MACHINE SETUP
0. (CONFIGURATION 0)
1.
2. >
STUDIO 1
3. (CONFIGURATION 3)
4. (CONFIGURATION 4)
5. (CONFIGURATION 5)
6. (CONFIGURATION 6)
7. (CONFIGURATION 7)
8. (CONFIGURATION 8)
9. (CONFIGURATION 9)
'ENTER' OR NUMBER SELECTS SET TO LOAD
ANALOG + INTERNAL
Recall Machine Setup Menu
To recall a configuration, on the Recall Machine Setup Menu select the number of the configuration
that you want to load (0 through 9).
A “Standby” message is displayed while the configuration is loading, and when complete, the system
returns to the Setup Menu. The new configuration name is shown in the Setup Menu’s Title Bar.