Owner manual

6-8 System Management TCR Series User's Manual
Check Disk
[Drive List, Select Drive] | MENU | Check Disk
The Check Disk function allows you to check a selected disk drive for problems, and if problems are
found, repair them. You may choose to run Check Disk routinely or whenever you suspect that the
the reported free space and total file size don’t correlate with the known physical disk size. Use the
following steps to check the disk:
1. On the Drive List, highlight the drive that you want to check and press MENU.
2. On the Drive menu, select CHECK DISK (item 7). The Check Disk menu appears.
CHECK DISK
PRESS '0' TO CHECK FOR PROBLEMS
PRESS '1' TO REPAIR PROBLEMS
Check Disk Menu
3. Press 0 to check for disk problems. If no problems are encountered, the Check Disk Results
menu appears. Press ENTER to return to the Drive List.
RESULTS OF CHECK DISK
FILE SYSTEM OK
PRESS 'ENTER' TO CONTINUE
Check Disk Result
4. If problems were encountered in step 3, repeat the procedure from step 1. In step 3, press 1
to repair the disk problems.
Format Drive
[Drive List, Select Drive] | MENU | Format Drive
Disk media errors can cause the file usage table and/or audio files to be stored incorrectly on disk.
You may become aware of disk/file errors if you notice that the reported free space and total file size
don’t correlate with the known physical disk size.