Owner's manual

ManualsBrands3B Scientific ManualsOptical devicesBinocular Course Microscope Model 300 (115 V, 50__60 Hz)

3B SCIENTIFIC

PHYSICS

Binocular Course Microscope Model 300 (115 V) 1003272

Binocular Course Microscope Model 300 (230 V) 1003273

Instruction Manual

03/13 ALF

1 Eyepiece

2 Tube

3 Revolver with objectives

4 Object stage

5 Condensor with iris

diaphragm and filter holder

6 Lamp housing

7 Mains switch

8 Adjustment knob for

mechanical stage

9 Adjustment knob for fine

and coarse focusing

10 Object guide

11 Lock screw for object stage

12 Head lock screw

13 Stand

1. Safety notes

• For power supply use only electrical sockets

with ground contact.

2. Description, technical data

The binocular course microscope allows two-

dimensional viewing of objects (thin sections of plant

or animal specimen) in 40x to 1000x magnification.

The microscope 1003272 is for operation with a

mains voltage of 115 V (±10%), and the

1003273 unit is for operation with 230 V (±10%).

Stand: Robust, all metal stand with arm perma-

nently connect to the base. Focussing by means

of separate knobs for coarse and fine adjust-

ment located on either side of the stand and

operated by rack and pinion drive with ball bear-

ings, adjustable stopper for protecting the object

slides and objective

Tube: Binocular Siedentopf head, 30° viewing

angle, 360° rotatable head, viewing distance

adjustable between 54 and 75 mm, ±5 dioptric

compensation for both eyepieces

Eyepiece: Pair of wide field eyepieces WF 10x

18 mm

Objectives: Revolver with 4 DIN achromatic

objectives 4x / 0.10, 10x / 0.25, 40x / 0.65, 100x

/ 1.25 oil (with specimen protection)

Magnification: 40x, 100x, 400x, 1000x

Object stage: x-y cross table, 125 x 130 mm

with object guide and coaxial adjustment knobs

perpendicular to the object stage, adjustment

range 70 x 30 mm

Illumination: 5 W fluorescent lamp incorporated

in the base integrated in base, with a converging

lens in lamp shaft, power supply 115 V resp.

230 V 50/60 Hz

Condenser: Abbe condenser N.A.1.25 NA 0.65

with iris diaphragm , filter holder and blue filter,

focussed via rack and pinion drive

Dimensions: 282 x 148 x 357 mm³ approx.

Weight: 5.2 kg approx.

Summary of content (2 pages)

PAGE 1
3B SCIENTIFIC® PHYSICS Binocular Course Microscope Model 300 (115 V) 1003272 Binocular Course Microscope Model 300 (230 V) 1003273 Instruction Manual 03/13 ALF 1 2 3 4 5 6 7 8 9 10 11 12 13 adjustable between 54 and 75 mm, ±5 dioptric compensation for both eyepieces Eyepiece: Pair of wide field eyepieces WF 10x 18 mm Objectives: Revolver with 4 DIN achromatic objectives 4x / 0.10, 10x / 0.25, 40x / 0.65, 100x / 1.
PAGE 2
3. Unpacking and assembly The microscope is packed in a molded styrofoam container. • Take the container out of the carton remove the tape and carefully lift the top half off the container. Be careful not to let the optical items (objectives and eyepieces) drop down. • To avoid condensation on the optical components, leave the microscope in the original packing to allow it to adjust to room temperature.