U21060 High Voltage Power Supply 6 kV User’s Manual (Preliminary) Version 1.00 English 3B Scientific - www.3bscientific.
Overview U21060 High-voltage power supply, 6 kV Universal, floating, high-voltage source for all electrostatic experiments and for operating spectral tubes as well as other gas-discharge tubes. Equipped with an integrated transformer which is resistant to highvoltages and which allows a tapping of the heating voltage for operating electronic tubes. Continuously adjustable, non-hazardous high voltage with passive current limiting and a digital voltage display.
Instructions for use Safety notes WARNING: Use caution when working with dangerous contact voltages. Observe the following notes when working: This device supplies contact-safe high voltage according to EN 61010-1. Do not connect multiple high-voltage power supplies in series. Do not switch on the device until you have assembled the complete experiment setup and turned the ADJUST regulation knob full ccw. Always switch off the device before touching any components of the circuit.
Digital LED-display, 3 digits. Continuous reading of the adjusted voltage. Chassis/ground/earth. The outputs are floating with respect to ground. The ! output or the may be connected to this socket. Caution: Do not connect another high voltage (more than 500 V DC) between any of the outputs and chassis/ground/earth !!! - or the internal transformer will be permanently damaged. 0 ... 6000 V DC output, max 2 mA load. Continuously adjustable.
