Owner's manual

3B SCIENTIFIC

PHYSICS

Vacuum Experiment Plate 1003166

Vacuum Bell Jar 1003167

Instruction sheet

12/12 ALF

1 Polished flange

2 Grip knob

3 2 cocks for hose connec-

tion and for ventilation

4 4-mm safety plug

5 Centre bore hole with

M12 thread

6 Power feed using con-

nection cables and safety

sockets

7 Rubber sealing disc

8 Metal plate mounted on

tripod stand

1. Safety instructions

• Protect the surface of the vacuum experi-

ment plate from moisture, chemicals and

mechanical affects to guarantee that the

system remains vacuum-tight.

Defective vacuum bell jars could implode.

• Before conducting experiments check the

vacuum bell jar for any damage (entrapped

air does not endanger operating safety).

2. Description

Vacuum experiment plate and vacuum bell jar

are used to set up a vacuum chamber for ex-

periments in the coarse (low) and fine vacuum

range.

2.1 Vacuum Experiment Plate

The vacuum experiment plate comprises a me-

tal plate with rubber sealing disc mounted on a

tripod and two cock valves used for hose con-

nection on the pump side as well as for ventila-

tion. A center bore hole with M12 thread is used

to secure experiment equipment. A vacuum-tight

power feed with 4-mm safety sockets and two

cables with 4-mm safety plugs are available for

the power supply.

PAGE 1
3B SCIENTIFIC® PHYSICS Vacuum Experiment Plate 1003166 Vacuum Bell Jar 1003167 Instruction sheet 12/12 ALF 1 Polished flange 2 Grip knob 3 2 cocks for hose connection and for ventilation 4 4-mm safety plug 5 Centre bore hole with M12 thread 6 Power feed using connection cables and safety sockets 7 Rubber sealing disc 8 Metal plate mounted on tripod stand 1. Safety instructions 2.
PAGE 2
.2 Vacuum Bell Jar Vacuum bell jar made of glass with grip knob and polished flange to be set on top of the vacuum experiment plate 3. Technical data Vacuum experiment plate Diameter: 250 mm Height: 90 mm Current feed-through: 2-pole with 4-mm safety sockets Power feed: via 2 cables approx. 1 m in length with 4-mm safety plugs Electrical limit specs.: max. 48 V, max. 12 A Vacuum connection: 2 hose nozzles 12 mm and 8 mm Ø Vacuum bell jar Inner diameter:: 190 mm Height: 220 mm 4.