OfficeConnect Fast Ethernet Hub 4, Hub 8, Hub 12 User Guide

9
Fast Ethernet Hub 12—Rear
12
6X
7X
1X
POWER
Power adapter socket
Only use the power adapter that is
supplied with this OfficeConnect
hub. Do not use any other adapter.
Uplink/Normal switch
Affects the operation of the highest numbered
port (port 12). For connecting the port to a
workstation, set to Normal (out).
For connecting the port to another
OfficeConnect unit, set to Uplink (in). Refer to
the “Connecting OfficeConnect Hubs
Together” section.
100BASE-TX RJ-45 ports
Use 100BASE-TX cable with RJ-45 connectors.
You can connect the OfficeConnect hub to any
workstation or piece of equipment that has a
100BASE-TX port. The highest numbered port
can be used to link to another OfficeConnect
unit. Refer to the “Connecting OfficeConnect
Hubs Together” section.
Uplink/Normal
3C16721.book Page 9 Wednesday, July 7, 1999 3:05 PM