User Guide ISDN LAN Modem 3C892

80 C

HAPTER

7: S

UPPLEMENTARY

OICE

ALL

ERVICES

Caller ID

The ISDN LAN Modem supports Caller ID and Caller ID Blocking.

Caller ID

Caller ID is supported on the ISDN LAN Modem. If you subscribe to this service, the

telephone number of the calling party is displayed on the caller ID device

connected to the ISDN LAN Modem’s phone port that is called.

The name of the caller may or may not be displayed even if your caller ID device

and service support this feature. Not all telephone companies display the Caller ID

name on a residential ISDN line. Check with your telephone company.

When both B channels are in use, Caller ID is not available. One

B channel must be available to provide the Caller ID information.

Caller ID Date and Time

The date and time displayed by your Caller ID unit is set according to the date and

time on the workstation connected to the ISDN LAN Modem when the ISDN LAN

Modem is powered on. If the date and time is incorrect, connect a workstation to

the ISDN LAN Modem that has the correct date and time and then power cycle the

ISDN LAN Modem. Once it is powered up, launch your Web browser and go to the

ISDN LAN Modem’s main page at

http://3com.oc.lanmodem/

Caller ID Blocking

To allow or prevent your telephone number from being displayed on a remote

Caller ID device, do the following. By default your telephone number is displayed.

Not all telephone companies support Caller ID Blocking. Check with your

telephone company. If Caller ID Blocking is not provided on your ISDN line, then

you cannot use this feature.

Go to the ISDN LAN Modem’s main page (

http://3com.oc.lanmodem/

Click

ISDN Parameters

Next to

Outgoing Caller ID Block

, select the port number box(es) for which you

would like Caller ID Blocking enabled. Clear the port number box(es) for which

you would like Caller ID Blocking disabled.

For instance, if you check the box labeled Port 1, calls made from the telephone

connected to that port will not display the telephone number to the user at the far

end.

Click

Submit