Dishwasher User Manual

4. Pull the lamp cover forward and remove it from the projector. Put the lamp cover in a safe

place.

T  T I P

If the cover is difficult to remove, insert a flat screwdriver or small coin into the slot on the

bottom of the lamp cover to gently pry the cover open.

5. Use a Phillips screwdriver to loosen the two captive screws from the bottom of the lamp

module.

N  N O T E

Don’t try to remove these screws. Captive screws can’t be removed, but they must be loose.

6. Use the handle on the bottom of the lamp module to slide out the lamp and remove it from the

projector.

C H A P T E R 5

Maintaining your interactive whiteboard system