Coffeemaker User Manual

GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. E
SECTION 3
NAV PAGES
3-11
Changing the map orientation:
1) From the Map Page Menu, turn the large right
knob to highlight ‘Setup Map?’ (Figure 3-16)
and press the ENT Key.
2) Turn the small right knob to select ‘Map’
(Figure 3-18) and press the ENT Key.
Figure 3-18 Map Setup Window
3) Turn the large right knob to highlight the
‘Orientation’ field.
4) Turn the small right knob to select the desired
option.
a) Select ‘DTK up’ to fix the top of the Map Display
to the desired course.
b) Select ‘North up’ to fix the top of the Map
Display to a north heading.
c) Select ‘Track up’ (Figure 3-19) to adjust the
top of the Map Display to the current track
heading.
Figure 3-19 Orientation Window
d) Press the ENT Key to accept the selected option
(Figure 3-20).
Figure 3-20 Map Setup Page
To enable/disable automatic zoom:
1) From the Map Page Menu, turn the large right
knob to highlight ‘Setup Map?’ and press the
ENT Key.
2) Turn the small
right knob to select ‘Map’ and
press the ENT Key.
3) Turn the large right knob to highlight the ‘Auto
Zoom’ field.
4) Turn the small right knob to select ‘On’ or
‘Off’.
5) Press the ENT Key to accept the selected option.
The automatic zoom feature automatically
adjusts the map range from 2000 nm through
each lower range, stopping at 1.0 nm when
approaching the destination waypoint.