Refrigerator User Manual

30 Integration in Tivoli NetView
Applications Components
The ServerView MIBs are installed in the directory \usr\ov\snmp_mibs\fujitsuSi-
emens. The inventory MIB Invent.mib is loaded during the installation so that the
Data Collection with the status variable SniInvCondition can be installed from this
MIB.
4.4 Applications of ServerView Integration in
NetView
This section describes the applications available on installing the integration
package.
4.4.1 Poll Application
The Poll application searches the network for Fujitsu Siemens PRIMERGY
servers on which ServerView agents have been installed. The Poll application
sets the ServerViewObj capability for all the ServerView servers it finds.
The object IDs, which specify the path when searching the network for
ServerView devices, are defined in the configuration file \usr\ov\bin\Server-
ViewPoll.cfg.
4.4.2 Map Application
The Map application configures a network node that was identified by the Poll
application as a Fujitsu Siemens PRIMERGY server for the status display in the
NetView map.
The following properties are set by the Map application:
– The properties of the network nodes are set to that of a PRIMERGY server.
– Submaps are created on each network node.
– Icons with symbol properties of the ServerView software are created in the
submaps.
4.4.3 Reset Function
The Reset function can be used to undo the configuration of one or all
PRIMERGY servers (i.e., to reset the configuration by the Map application).