Instruction Manual

Installation

3Dlabs Oxygen VX1-1600SW User's Guide

7. Connect the video cable from your monitor to the appropriate video connector on the card.

There are two video connectors on the VX1-1600SW, an LVDS connector for connecting to

the Silicon Graphics 1600SW digital flat panel display, and a smaller analog display connector

that uses the conventional VGA connector. If you are connecting a Silicon Graphics 1600SW

flat panel, attach the display’s molded-in signal cable connector to the LVDS connector,

making certain that the clips engage so the cable does not detach inadvertently.

Do not attach a Silicon Graphics 1600SW flat panel display and an analog VGA display to the

Oxygen VX1-1600SW simultaneously. The Oxygen VX1-1600SW only drives one display at

a time.

8. Plug in and start up your system, including peripherals, and log on to your operating system.

Standard monitor

connector

X1-1600SW

SGI 1600SW flat

panel display

LVDS connector