Instruction Manual

Troubleshooting
3Dlabs Oxygen VX1-1600SW User's Guide
20
5. Shut down, remove your old graphics card, and reinstall your Oxygen card.
6. Make sure that you are not using an old graphics board driver, and that you have
uninstalled any other graphics drivers — particularly those provided by other companies
using 3Dlabs chipsets.
7. Please see the Oxygen and Permedia System Integration Guide in the Troubleshooting
FAQ section at http://www.3dlabs.com/support
8. You may need to update your system BIOS. See your system documentation for system
BIOS update information.
Question: I’m experiencing network problems since I installed my Oxygen card.
Solution: You may need to reinstall or update your Ethernet driver. See your system or Ethernet
adapter documentation for more information.
Online Information
If you cannot find the problem you are experiencing, or the solution to a problem, listed in this chapter,
check the Troubleshooting FAQ list at http://www.3dlabs.com/support
, or contact your Oxygen card vendor
for additional help.