Owner manual

Regulatory Statements
3Dlabs Graphics Accelerator Card User's Guide
42
aÉÅä~ê~íáçå=çÑ=`çåÑçêãáíó
aÉÅä~ê~íáçå=çÑ=`çåÑçêãáíóaÉÅä~ê~íáçå=çÑ=`çåÑçêãáíó
aÉÅä~ê~íáçå=çÑ=`çåÑçêãáíó=
==
=
We, 3Dlabs, Incorporated,
480 Potrero Avenue
Sunnyvale, CA 94086
Phone [phone]
Fax [phone]
United States of America
declare under our sole responsibility that the
3Dlabs Graphics Accelerator product(s)
to which this declaration relates are in conformance with the following standards:
EN 55024:1998, clause 4.2.1
EN 55024:1998, clause 4.2.2
EN 55024:1998, clause 4.2.3
EN 55024:1998, clause 4.2.3.2
EN 55024:1998, clause 4.2.6
EN 55022:1994, clause 5
EN 55022:1994, clause 6
IEC950:1991, 2
nd
Edition
EN60950:1992
following the provisions of the 89/336/EEC Directive.
San Jose, California, December 1999
3Dlabs, Inc.
Warning: Any use of, installation practices, modifications or maintenance procedures
carried out which are not in accordance with the issued “instructions for use” or approved by
3Dlabs Inc. will nullify the CE certification of this product and could lead to prosecution.
We, 3Dlabs, Incorporated,
480 Potrero Avenue
Sunnyvale, CA 94086
Phone [phone]
Fax [phone]
United States of America
declare under our sole responsibility that the products
3Dlabs Graphics Accelerator Card
comply with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interferences that may cause undesired
operation.