SDS

3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15
__________________________________________________________________________________________
Page 6 of 12
Flammable Limits(UEL)
No Data Available
Vapor Pressure
No Data Available
Vapor Density
> 1
Density
1.1 g/ml
Specific Gravity
1.1 [Ref Std: WATER=1]
Solubility In Water
No Data Available
Solubility in Water
Negligible
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
No Data Available
Hazardous Air Pollutants
43.1
Volatile Organic Compounds
39 g/l [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
3.5 % weight [Test Method: Tested per ASTM protocol]
Percent volatile
45.0 % weight
VOC Less H2O & Exempt Solvents
39 g/l [Test Method: calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Light
Sparks and/or flames
Temperatures above the boiling point
10.5. Incompatible materials
Strong oxidizing agents
Alkali and alkaline earth metals
Strong acids
10.6. Hazardous decomposition products
Substance Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.