SDS

Bondo® All-Purpose Putty, 20052, 20054, 30054 04/14/14
__________________________________________________________________________________________
Page 7 of 14
Vapor Density
3.6 [Ref Std: AIR=1]
Density
1.14 g/ml
Specific Gravity
1.14 [Ref Std: WATER=1]
Solubility in Water
Negligible
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
192,000 - 208,000 centipoise
Hazardous Air Pollutants
0.355 lb HAPS/lb solids
Volatile Organic Compounds
17.6 % weight [Test Method: calculated per CARB title 2]
Volatile Organic Compounds
200 g/l [Test Method: calculated SCAQMD rule 443.1]
Percent volatile
17.9 % weight
VOC Less H2O & Exempt Solvents
201 g/l [Test Method: calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable. Stable under normal conditions. May become unstable at elevated temperatures and/or pressure.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Sparks and/or flames
Heat
10.5. Incompatible materials
Strong acids
Strong oxidizing agents
Alkali and alkaline earth metals
Strong bases
10.6. Hazardous decomposition products
Substance Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be