SDS

Bondo® All-Purpose Putty, 20052, 20054, 30054 04/14/14
__________________________________________________________________________________________
Page 13 of 14
Incinerate in a permitted waste incineration facility. As a disposal alternative, utilize an acceptable permitted waste disposal
facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical
substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated &
disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective
regulating authorities to determine the available treatment and disposal facilities.
SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.
SECTION 15: Regulatory information
15.1. US Federal Regulations
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient C.A.S. No % by Wt
Styrene Monomer 100-42-5 10 - 30
15.2. State Regulations
Contact 3M for more information.
California Proposition 65
Ingredient C.A.S. No. Classification
SILICA, CRYSTALLINE (AIRBORNE
PARTICLES OF RESPIRABLE SIZE)
None Carcinogen
Titanium Dioxide 13463-67-7 Carcinogen
WARNING: This product contains a chemical known to the State of California to cause cancer.
15.3. Chemical Inventories
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
15.4. International Regulations
Contact 3M for more information.
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: Other information
NFPA Hazard Classification
Health: 2 Flammability: 3 Instability: 1 Special Hazards: None