Project Ideas

page 2
3M, ScotchBlue, the Plaid Design
and the BLUE color of the tape
are trademarks of 3M.
Printed in U.S.A.
©3M 2010
TM
Construction and Home
Improvement Markets Division
3M Center, Building 223-4S-02
St. Paul, MN 55144-1000
1-800-494-3552
www.ScotchBlue.com
Décor Ideas
Want a gourmet kitchen without the major overhaul? Add a tile
backsplash and under-cabinet lights — both are functional and
design-oriented, and deliver a big bang for your buck. Replacing
fixtures like faucets and lighting can also give your kitchen an instant
and inexpensive makeover.
Paint Tips
High-gloss paint is often recommended for cabinets, however
semi-gloss adds a rich finish. When applying paint to cabinets,
use a quality brush — the better the brush, the better the finish.
Begin painting at the center of the cabinets and follow the grain.
70-0713-3418-2
The success of any painting project depends on making sure you have the right
tools at hand. This ScotchBlue
™
Tape Selector Chart makes it easy.
1. Find the part of the home on the chart that best represents what you’re painting.
2. Look for the surface you need to mask (this is not the surface you are painting!)
3. If more than one tape is recommended for a surface, consider removal time and
adhesion level needed to help determine the right tape for your project.
Selecting the Right ScotchBlue
™
Painter’s Tape
= Not Recommended
= Recommended
= Test compatibility before
use as results may vary.
* Learn more about masking on textured surfaces at www.ScotchBlue.com
** None of the ScotchBlue
™
Painter’s Tapes are recommended for use on
laquered surfaces
Clean the Surface: Be
sure the surfaces you are
planning to mask are clean,
dry and dust-free so tape
will stick properly.
Tricks for Sharp Lines: On
more textured surfaces be sure
to seal the edges of the tape with
the base paint color. This will help
the tape adhere to the rougher
wall and give you clean, sharp,
professional paint lines.
Helpful Hints
Walls & Ceilings
-Heavy Texture*
-Light Texture
-Smooth Texture
Ceiling Tiles & Grids
Paneling
Vinyl Coated Wallpaper, Borders
Wood Trim
-Heavy Grain (oak, hickory)
-Smooth Grain (birch, ash, maple)
Vinyl, Aluminum, Metal Trim
Solid Hardwood
-Finished, Engineered Hardwood
-Unfinished
Carpet
Marble, Slate, Stone, Concrete
Vinyl, Laminate
Brick, Block, Stone, Concrete
Hardware, Glass
Vinyl, Aluminum, Metal Trim
Vinyl Siding, Clapboard (non-rough)
Wood Siding (rough & non-rough)
Cabinets
-Heavy Grain (oak, hickory)
-Smooth Grain (birch, ash, maple)
-Paper or Veneer Laminates
Countertops, Tile, Grout, Caulk
Hardware, Glass, Porcelain
AREA YOU NEED TO MASK
Freshly Painted
Non-Textured Surfaces
Freshly Painted
Non-Textured Surfaces
Freshly Painted
Non-Textured Surfaces
Freshly Painted
Non-Textured Surfaces
Freshly Painted
Non-Textured Surfaces
ScotchBlue
TM
Original
Multi-Surface
ScotchBlue
TM
Advanced
Multi-Surface
ScotchBlue
TM
Delicate Surface
Walls & Ceilings
Floors
Other Interior Surfaces
Other Exterior Surfaces
Baseboards, Window & Door Trim