Product Label

Check the seal of your 3M
™
Half Facepiece Reusable
Respirator each time you don the respirator
Please recycle. Printed in U.S.A.
© 3M 2011. All rights reserved.
70-0702-2048-1
General Offices
3M Center
St. Paul, MN 55144-1000
Helping You
Wear it Right
Wearing your 3M
™
Half Facepiece
Reusable Respirator
Pull the top strap over
your head, placing the
head cradle on the
crown of your head.
2
Hook the bottom
straps together
behind your neck.
3
Adjust strap tension to
achieve a secure fit.
4
Place the respirator
over your nose and
mouth with bottom
straps unfastened.
1
Positive Pressure User Seal Check
Place the palm of your hand over the exhalation
valve cover and exhale gently. The facepiece
should bulge slightly. If air leaks between
the face and the faceseal of the respirator,
reposition it and adjust the straps for a more
secure seal.*
Negative Pressure User Seal Check
Using Particulate Filters
Place your thumbs over the center of the filters
and inhale gently. The facepiece should collapse
slightly. If air leaks between the face and the
faceseal of the respirator, reposition it and adjust
the straps for a more secure seal.*
Using Cartridges
Place the palms of your hands over the
cartridges and inhale gently. The facepiece
should collapse slightly. If air leaks between the
face and the faceseal of the respirator, reposition
it and adjust the straps for a more secure seal.*
WARNING
These respirators help reduce exposures to certain airborne particulates. Before use, the wearer must read and understand the User Instructions provided as a part
of the product packaging. A written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing
and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may
result in sickness or death. For proper use, see package instructions, supervisor, or call 3M OH&ESD Technical Service in USA at 1-800-243-4630 and in Canada
at 1-800-267-4414.
3M
™
Half Facepiece Disposable
Respirator 5000 Series
3M
™
Half Facepiece Reusable
Respirator 6000 Series with Cartridges
3M
™
Half Facepiece Reusable
Respirator 6000 Series with Filters
For More Information
In U.S.
Technical Assistance: 1-800-243-4630
Customer Service: 1-800-328-1667
3M.com/PPESafety
In Canada
Technical Assistance: 1-800-267-4414
Customer Service: 1-800-364-3577
3M.CA/Safety
Note: Before assigning any respirator to be worn in a contaminated area, a qualitative
or quantitative fit test must be performed per U.S. OSHA standard 29CFR 1910.134 or
local requirements.
Note: Perform a positive and/or negative pressure user seal check each time the
respirator is donned. If you cannot achieve a proper seal, do not enter contaminated
area. See your supervisor.
* If you cannot achieve a proper seal, do not enter contaminated area. See your supervisor.