Datasheet
3M
™
ReusableHalf
Masks 6500QL Series
Technical datasheet
Product description
3M
™
Reusable Half Masks 6500QL Series has been designed
with tough and dirty work environments in mind and are
available with 3M
™
Quick Latch Drop Down Mechanism. 3M
™
Quick Latch allows easy on and off as you move in and out
of contaminated areas, with noneed to remove your hard
hat or face shield when lowering orraising your respirator.
Available in three sizes, all masks have the 3M
™
bayonet
connection system allowing connection to a broad range of
twin lightweight filters toprotect against gases, vapours and
particulates depending onyour individual needs.
Key features
Ŕ Adjustable head harness assembly, including 3M
™
Quick
Latch Drop Down Mechanism
Ŕ Silicone faceseal
Ŕ Flexible bayonet system for connection to a wide range
of3M
™
gas, vapour and particulate filters
Ŕ Over-moulded/low-profile design simplifies cleaning
andmaintenance with fewer parts and crevices
Ŕ Valve cover design that directs exhaled breath and
moisture downward and allows for an easy positive
pressure seal check
Ŕ Available with 3M
™
Quick Latch, designed sothat the
half mask can easily be “dropped down” when not
inacontaminated area, without having to remove the
headcradle from your head
Ŕ 3 sizes (small – 6501QL, medium – 6502QL, large –
6503QL)
Filter options
3M™ Reusable Half Masks 6500QL Series can be used with
a variety of different filter options:
Gas and vapour filters only: The filters generally protect
against either single or multiple contaminant type(s). 3M™
Gas and Vapour Filters 6000 Series fit directly onto the
respirator.
Particulate filters only: These filters provide protection
against solid and non-volatile liquid particles. 3M™
Particulate Filters 2000 Series fit directly onto the respirator.
3M™ Particulare Filters 5000 Series may be used in
combination with a3M
™
501 filter retainer and a 3M
™
Gas
and Vapour Filter 6000 Series.
3M™ Particulate Filter 6035 is an encapsulated P3 filter,
which fitsdirectly onto the respirator.
3M™ Particulate Filter 6038 is an encapsulated (P3)
particulate filter with a layer of carbon for low capacity gas
protection.
Combination of gas and vapour and particulate filters:
3M™ Gas, Vapour and Particulate Filters 6091, 6092, 6095
and 6096 have particulate filter media integrated with the
gas and vapour cartridge.
Supplied-Air mode: All filters can be used with 3M™ S-200+
Supplied Air Regulator except for the P1 (5911) and P2
(5925,2125 and 2128).