Datasheet

ManualsBrands3M ManualsRespiratory ProtectionRespirator Face Masks (L)

™

Full Face Respirator

6000 Series

Product description

™

Full Face Respirator 6000 Series are available in three sizes, all

masks have the 3M bayonet connection system allowing connection

to a broad range of twin lightweight filters or approved powered

and supplied air systems to protect against gases, vapours and

particulates depending on your individual needs.

Key features

Ŕ Reusable, low maintenance respirator

Ŕ Lightweight, well-balanced with soft silicone nose cup ensures

comfort during long periods of work

Ŕ Flexible System (gas and vapour and/or particulate filters plus

certain powered and supplied air options)

Ŕ Twin filter design

Ŕ 3 sizes (small - 6700, medium – 6800, large - 6900)

Ŕ Spectacle Kit available

Ŕ Face piece weight: 400 grams

Nominal Protection Factors offered by the

™

Full Face Respirator 6000 Series

™

Full Face Respirator 6000 Series Nominal Protection Factor*

P1 Particulate Filters 5

P2 Particulate Filters 15

P3 Particulate Filters 1000

Class 1 Gas & Vapour Filters 2000 or 1000ppm

(Whichever is lower)

Class 2 Gas & Vapour Filters 2000 or 5000ppm

(Whichever is lower)

™

Versaflo

™

Powered Air Respirator

TR-602E/TR-802E

2000

™

S-200+ Supplied Air Unit See S-200+ Datasheet

*Nominal Protection Factor (NPF) - a number derived from the maximum percentage of total

inward leakage permitted in relevant European Standards for a given class of respiratory

protective. This may not be the level of respiratory protection that can be realistically

expected in the workplace by wearers.

Many countries apply Assigned Protection Factors (APFs). For example: German APFs

range from 30 to 400 and UK APFs range from 10 to 40 depending on the product type and

classification. Employers may apply a value lower than the NPF/APF if deemed applicable.

Please refer to EN 529:2005 and National workplace protection guidance for application of

these numbers in the workplace.

Please contact 3M for further information.

Standards and approvals

These products have been tested to the relevant European Standards:

™

Full Face Respirator 6000 Series to EN 136:1998 Class 1. EN

12942:1998 + A2:2008 and EN 14594:2005 (with approved air

delivery units). Relevant performance requirements of EN 166: 2001

(Eye Protection - Protection against high speed particles, medium

energy). These products are in conformity with European regulation

and UK regulations and/or Directives

The Certificates and Declarations of Conformity available at the

following website: www.3M.com\Respiratory\certs

Technical datasheet

Summary of content (4 pages)

PAGE 1
3M™ Full Face Respirator 6000 Series Technical datasheet Product description 3M™ Full Face Respirator 6000 Series are available in three sizes, all masks have the 3M bayonet connection system allowing connection to a broad range of twin lightweight filters or approved powered and supplied air systems to protect against gases, vapours and particulates depending on your individual needs.
PAGE 2
3M™ Full Face Respirator 6000 Series Gas and Vapour/Combination Filters Filter 6051 (06911) 6055 (06915) Standard EN 14387: 2004 +A1:2008 Class A1 A2 Hazard Organic Vapours bp>65 °C 6054 EN 14387: 2004 +A1:2009 K1 Ammonia and derivatives 6057 EN 14387: 2004 +A1:2010 ABE1 Organic vapours (boiling point above 65°C), inorganic vapours and acid gases. 6059 EN 14387: 2004 +A1:2011 ABEK1 Organic vapours (boiling point above 65°C), inorganic vapours, acid gases, ammonia and its derivatives.
PAGE 3
M™ Full Face Respirator 6000 Series Particulate Filters Filter Standard Class Hazard 5911 5925(06925) 5935 EN 143:2000 / A1:2006 P1 R P2 R P3 R Solid and liquid particles 2125 2135 EN 143:2000 / A1:2006 P2 R P3 R Solid and liquid particles 2128 2138 EN 143:2000 / A1:2006 P2 R P3 R Solid and liquid particles, plus relief from Ozone up to 10 x OEL), plus relief from nuisance level acid gas/ organic vapour 6035 EN 143:2000 / A1:2006 P3 R Solid and liquid particles – in solid plastic case fo
PAGE 4
3M™ Full Face Respirator 6000 Series Use limitations Cleaning and storage Before use, check the expiration date. For other use limitations please refer to the User Information supplied with the products. These respirators do not supply oxygen. Do not use in oxygen deficient areas.