Datasheet

Datasheet

The QSA connection technology was developed for orderly termination

of plastic insulated cables and jumper wires, allowing for individual

screened circuits to be terminated.

The QSA connection module consists of 20 / 40 Insulation Displacement

Contacts with connection facility. The IDC contacts are designed to be used

with QSA / LSA-Plus

approved IDC insertion tools.

The connection modules for screw fixing are intended for use in small

distribution units.

The fixing dimensions of the connection modules for 10 or 20 pairs (colour

code: grey) are 96 or 170 mm according to DIN 47608 (part 1 and 2).

The QSA modules for screw fixing are available as 10 and 20 pair con-

nection modules. They are capable of accepting conductor diameters

from 0.4 to 0.8 mm.

The earth strips (colour: red) for 44 or 84 wires, a wide range of accessories

and a comprehensive overvoltage protection complete the product family.

QSA Series 1

connection modules for screw fixing

Features

• System with a pitch of 22.5 mm

• Conductor diameters from 0.4 – 0.8 mm

• Suitable for screw fixing in small distribution units

Benefits

• Fixing dimensions according to DIN 47608 (part 1 and 2)

• Wide range of accessories

• Overvoltage protection available

• Earth modules available

QSA connection module for 10 pair

QSA earthing module for 44 wires

QSA connection module for 20 pair

QSA earthing module for 84 wires

PAGE 1
Datasheet QSA Series 1 connection modules for screw fixing The QSA connection technology was developed for orderly termination of plastic insulated cables and jumper wires, allowing for individual screened circuits to be terminated. QSA connection module for 10 pair The QSA connection module consists of 20 / 40 Insulation Displacement Contacts with connection facility. The IDC contacts are designed to be used with QSA / LSA-Plus® approved IDC insertion tools.
PAGE 2
Specification General product features Contact principle Capacity Type of circuit Materials Housing: Colour: Contacts: Minimum pitch Connection features Conductor range (solid copper) Wire diameter Overall insulation sheath diameter Number of reterminations 0.4 – 0.6 mm (AWG 26-22) 0.8 mm (AWG 20) Insertion tool Electrical features Insulation resistance ABS, self extinguishing UL94 V-0 Grey, RAL 7035 Special brass alloy, silver-plated 22.