User guide

AD-4407 Weighing Indicator Page 51
Enabling Key Switches
Enabling Key SwitchesEnabling Key Switches
Enabling Key Switches
Enables the key switches that are disabled by the DK command. Not applicable to the
keys disabled by f12.
Template EK,n
n: key switch number (0: all keys, 1 - F: refer F-Function f12)
Command ex. to enable all keys
Reply
13.3.3. Commands to Set Parameters
Set Limit/Setpoint Value
Set Limit/Setpoint ValueSet Limit/Setpoint Value
Set Limit/Setpoint Value
Sets the limit or setpoint value of the comparison. The decimal point is not necessary.
Template Sm,n, [ value ]
m: code memory number, 0 - 4
n : setpoint order number, refer to "Setting the setpoint"
Command
Reply
Set Zero Band
Set Zero Band Set Zero Band
Set Zero Band
Sets the f26 value (zero band) of the comparison. The decimal point is not necessary.
Template SZ, [ value ]
Command
Reply
Set Preset Tare
Set Preset TareSet Preset Tare
Set Preset Tare
Sets the preset tare value. The decimal point is not necessary.
Template PT,m, [ value ]
m: code memory number, 0 - 4
Command
Reply
Set Unit Weight for Counting Mode
Set Unit Weight for Counting ModeSet Unit Weight for Counting Mode
Set Unit Weight for Counting Mode
Sets the unit weight value with decimal point.
Template UW,m, [ value ]
m: code memory number, 0 - 4
Command
Reply
W U 2 , 2 , 3.1
W U 2 , 2 , 3.1
T
P
2
,
2
,
3
1
T
P
2
,
2
,
3
1
K
E
0
,
K
E
0
,
Z
S
+
,
4
7 8
Z S + , 4 7 8
1
S
3
,
+
,
0
61
1
S
3
,
+
,
0
61
13.3. Command Format