User guide

ManualsBrandsA&D Weighing ManualsScalesUC-321PL

UC-321PL

Precision Health Scale

Instruction Manual

Before Use

Precautions ---------------------------- 1

Scale Components-------------------- 2

Display Symbols ----------------------- 3

Installing (or Replacing) Batteries

------ 3

Operations

Basic Measurement------------------- 4

Measuring Your Weight on a Carpet

----- 6

References

Specifications--------------------------- 7

Maintaining the Scale----------------- 7

Before Requesting Service --------- 8

Precautions

 Please read this booklet before using your scale.

 Place your scale on a solid level surface, such as tile, wood,

or laminate flooring.

 Do not place your scale on a soft, wet or slippery floor.

If the scale must be used on a carpet, be sure to attach the

plastic add-on feet as shown on Page 6.

 Your scale contains delicate, high-precision parts. Avoid

extremes in temperature, humidity, direct sunlight, shock,

moisture and dust.

 Do not step on your scale with your feet wet. Be sure that your

feet are dry to prevent slipping or serious injury.

 Step on the center portion of your scale gently.

 Do not step on the display window.

 Holding the measurement switch for extended periods will

shorten battery life.

Indications for Use

 This scale is designed for home and clinical use.

1WMPD4001599

Display

No!

Shock

Summary of content (8 pages)

PAGE 1
Instruction Manual UC-321PL Precision Health Scale Before Use Precautions ---------------------------- 1 Scale Components -------------------- 2 Display Symbols ----------------------- 3 Installing (or Replacing) Batteries ------ 3 Operations Basic Measurement------------------- 4 Measuring Your Weight on a Carpet ----- 6 References Specifications--------------------------- 7 Maintaining the Scale----------------- 7 Before Requesting Service --------- 8 Precautions Please read this booklet before using
PAGE 2
Scale Components Display Back Ready/Complete Symbol Low Battery Indicator Slide Switch Front Battery Compartment Measurement Switch The following measurements can be selected by the slide switch and are classified into two categories - WEIGHT A and WEIGHT B. Within WEIGHT A and WEIGHT B, you have a choice to select and have your weight displayed in kg or lb. The difference between WEIGHT A and WEIGHT B is the speed of communication from the data port to another device (e.g.
PAGE 3
Display Symbols Ready/Complete symbol. This symbol is displayed when the measurement display is stable. Low battery indicator. If this symbol is displayed, replace all four batteries with new ones. Installing (or Replacing) Batteries Caution Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. Improper installation of the batteries may cause battery leakage.
PAGE 4
Basic Measurement Measuring Your Weight 1. Set the slide switch to the correct mode. Example: Set the slide switch to [WEIGHT B]. Set the slide switch to the correct mode Press the measurement switch 2. Press the measurement switch gently. All display segments are displayed for several seconds. Ready/Complete symbol 3. Wait until the symbol is displayed. Wait until “0.0 kg /0.0 lb” and the Ready/Complete symbol are displayed. Step on the scale 4.
PAGE 5
Basic Measurement Measuring an Infant or Small Animal Set the slide switch to the correct mode 1. Set the slide switch to the correct mode. Example: Set the slide switch to [WEIGHT B]. Press the measurement switch Step on the scale 2. Press the measurement switch gently and step on the scale. All display segments are displayed for several seconds. Step on the scale without any baby Ready/Complete symbol or animal in your arms before “0.0 kg /0.0 lb” is displayed. 3.
PAGE 6
Measuring Your Weight on a Carpet Place the scale on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic add-on feet. Steps for Attaching the Add-on Feet 1. Each add-on foot has two pins. Match those pins to the holes on the scale leg and insert firmly. 2. Attach add-on feet on all four legs. Notes Please be careful not to fall when using the add-on feet. We recommend using this scale on a solid and level surface.
PAGE 7
Specifications Digital display Liquid crystal display, 25 mm character height Maximum capacity 200 kg / 450 lb Minimum display 0.1 kg / 0.2 lb Power source Four type AA batteries (R6P, 1.5 volt x 4) Battery life Approximately 1000 measurements Accessories Add-on feet (4), Instruction manual Specifications are subject to change without prior notice or any obligation on the part of the manufacturer.
PAGE 8
Before Requesting Service Problems Nothing is displayed by pressing the measurement switch. “88888” remains displayed. “H” or “l” is displayed. The difference between an estimated weight and a measured weight is excessive. Corrective Action Check the battery installation. Replace all four batteries with new ones. Remove and reinstall the batteries. Place the scale on a solid level surface. Remove any foreign objects that might be touching the bottom of the scale.