Manual

Operation

Connecting andConnecting and

Connecting and

owering Upowering Up

owering Up

our Pour P

our P

rinterrinter

rinter

1. Attach the appropriate cable between the printer and

your host device. The connector on the printer side is

“keyed” so that you cannot plug the cable in the

wrong way. This means that the pins should be

positioned so that a slight pressure will seat the cable

properly. Do not force the pins in. Doing so could

damage the cable.

2. Plug the power cord into the back of the printer. Plug

the transformer into an appropriate AC outlet. The

unit will power up automatically and print

eadyeady

eady. This

means the printer is ready to print.

The Paper Feed switch on the printer is a rocker type

switch. Push the left side of the rocker switch to toggle

the printer on and offline. Push the right side of the switch

to advance the paper.

Your printer is now ready for printing.

The printer stores characters for printing until one of two

things happens:

1. Its line buffer is filled.

2. It receives a line feed (hexadecimal 0A) or a carriage

return (hexadecimal 0D) code.

When (1) or (2) occurs, the printer prints out the contents

of its line buffer. If the buffer is empty when the carriage

return is received, the printer simply advances the paper

one line, leaving a blank line in the printout.

Maintenance

When printing becomes faint or difficult to see, replace

the ribbon in your printer with an Epson ERC-09 cartridge

ribbon.