Manual

ManualsBrandsA&D ManualsPrinters191

To access the setup menu follow these steps:

1. Unplug the printer either at the outlet or at the back of

the printer.

2. Press and hold down the left side of the rocker switch

and plug in the printer. The printer will advance the

paper. After the paper advance has stopped, count for

3 to 5 seconds and then release the switch. The

following is printed:

If you wait less than three or more than five seconds

eady eady

eady is printed and you will have to try steps 1 and 2

again to access the setup menu.

After you access the setup menu, if you press

NEXT NEXT

NEXT (left

side of switch) repeatedly you will see the following list

printed. If you keep pressing

NEXT NEXT

NEXT (left side) the list

repeats itself.

As you can see from the above printout the setup menu

contains the following items:

•

CONFIGURECONFIGURE

CONFIGURE menu

•

CUSTCUST

CUST

OMOM

OM menu

•

SET CLSET CL

SET CL

OCKOCK

OCK menu

•

RESET SEQ#RESET SEQ#

RESET SEQ#

The following pages explain these items and how to

customize the printer to your needs.

The first setup menu item reads:

CONFIGURE [NEXT/OK]CONFIGURE [NEXT/OK]

CONFIGURE [NEXT/OK]

[NEXT/OK][NEXT/OK]

[NEXT/OK] is a visual clue so you know that pressing the

left side of the rocker switch will go to the

NEXT NEXT

NEXT part of

the menu and that pressing the right side of the rocker

switch will accept (or say

OKOK

OK to) what this line of the setup

menu says.

Accessing the SetupAccessing the Setup

Accessing the Setup

MenuMenu

CONFIGURECONFIGURE

CONFIGURE