Manual

ManualsBrandsA&D ManualsPrinters191

1414

YES -YES -

YES - voltage will be in a low state until the

unit is busy then voltage level goes high.

NO -NO -

NO - voltage will be in a high state until the

unit is busy then voltage level goes low.

ONLINE/OFFLINEONLINE/OFFLINE

ONLINE/OFFLINE is next.

Choices:

YES -YES -

YES - enables the rocker switch to turn the

printer offline.

NO -NO -

NO - disables the ONLINE/OFFLINE ability.

EXT CH SETEXT CH SET

EXT CH SET is next. This stands for Extended Character Set.

Choices:

YES -YES -

YES - Allows you to use hexidecimal numbers

above 80 (true only for 8 data bits.)

NO -NO -

NO - Disables the Extended Character Set

ability.

PRINT READY PRINT READY

PRINT READY is next.

Choices:

YES -YES -

YES - Prints

eady eady

eady upon power up.

NO -NO -

NO - Disables printing

ReadyReady

Ready

ARNING - ARNING -

ARNING - If you choose

NONO

NO, then you will need to hold

the left side of the rocker switch down for 4 to 6 seconds

to access the setup menu. Begin timing when you plug in

power to the unit and the red light comes on. The paper

feed motor does not run upon power up when

Ready Ready

Ready is

disabled.

The next item in the Setup Menu is

SET CLSET CL

SET CL

OCKOCK

OCK

With the printer in the setup menu and with

SET CLSET CL

SET CL

OCK OCK

OCK as

the last item printed, if you press

OK OK

OK (right side) the printer

will print the following:

The printout shows the year currently in memory. The

0 is

reversed (white on black) to show the position of the cursor.

This is the number which will be incremented if

NEXT NEXT

NEXT (left

side) is pressed. If the number is correct press

OK OK

OK (right side)

and the following is printed:

Ext Ch SetExt Ch Set

Ext Ch Set

The choice to use the

extended character

set is available only

when 8 data bits are

chosen.

rint Readyrint Ready

rint Ready

SET CLSET CL

SET CL

OCKOCK

OCK

Online/OfflineOnline/Offline

Online/Offline