Manual

After typing RUN, your custom character will be stored in

the printer’s memory. It will retain this information until

the printer is switched off or until you write over the data

by defining a different character.

To print your newly designed character, simply send

CHR$(126) which corresponds to hexidecimal value 7E.

This control code is used when setting the printer’s time

and date clock. Following is the text string to send when

setting the clock:

This control code is used to read the printer’s time and

date clock. Following is the ASCII string received:

Sending this control code will turn off the reverse field

mode that is selected using control code 25.

Send this control code to turn on the reverse field

printing mode. This will print white letters on a dark

background. Do not print more that three reverse field

print lines. Also, do not print more than a few empty

spaces in a reverse field. The printer may become

overloaded and stop printing.

Set Time and DateSet Time and Date

Set Time and Date

Control Code 20Control Code 20

Control Code 20

Read Time and DateRead Time and Date

Read Time and Date

Control Code 22Control Code 22

Control Code 22

Cancel Reverse FieldCancel Reverse Field

Cancel Reverse Field

Control Code 24Control Code 24

Control Code 24

2323

Reverse Field ControlReverse Field Control

Reverse Field Control

Code 25Code 25

Code 25