Manual

The printer powers up in the column mode last selected

by configuration. You can change the column width by

sending the appropriate control code from the list below:

Control code 29 - 24 columns

Control code 30 - 32 columns

Control code 31 - 40 columns

You can send the control code at any point on a line

before the buffer becomes filled. You cannot change

column widths on the same line.

The AD-1191 printer can produce all ASCII characters

from hex 20 through hex 7D (decimal 32 through 125).

Here’s what they look like:

Note the last two codes of the usual ASCII character set

are not supported. Instead, if CHR$(126), which corre-

sponds to hexadecimal 7E, is received by the 122X printer,

it will print the character defined in its RAM (Random

Access Memory). The section on USER Programmable

Character describes how this RAM can be loaded with

any 6 x 8 pattern.

The model AD-1191 also has a graphic character set that

resides between hexidecimal values 80 and FF (decimal

128 and 255).

2424

rintable Charactersrintable Characters

rintable Characters

Selectable ColumnSelectable Column

Selectable Column

WidthWidth

Width

Codes 29, 30, 31Codes 29, 30, 31

Codes 29, 30, 31