Owner's Manual blood pressure monitor

Section 2: Diving with the Monitor 3 Air
25
Functions at the Surface
Upon surfacing
After reaching the surface, the Monitor 3 automatically
switches into wait-mode for five minutes. This is the
amount of time necessary to recognize the end of the
dive. The five minute delay allows you to come to the
surface to orient yourself, then resume the dive. If you
stay at the surface longer than 5 minutes, the dive is
entered into the logbook and the Monitor 3 Air switches
into surface mode.
Surface Mode
Note: Surface mode will stay visible for 3 minutes. After that,
the screen will go blank to save battery power. To reacti-
vate the surface mode display, touch contacts A and D.
Surface mode icon
Five minutes after surfacing, the Monitor 3 enters Surface
Mode. While in Surface Mode, the Surface Mode Icon
appears at the bottom of the icon window.
Display immediately
upon surfacing
Surface mode icon
display