Owner's Manual blood pressure monitor

Section 3: Memory Mode
38
Activation
STEP 1
From Ready Mode or Surface Mode , touch
contacts A & C. The computer will emit one beep
and the Memory Mode icon will appear in the
mode zone. If activating from Surface Mode, the
current surface interval also appears.
STEP 2
Touch Contacts A & D to confirm the selection.
After a few moments, the information for the
most recent logged dive appears.
Note: If you are only checking surface time, you
can immediately return to Surface or Ready
Mode by touching contacts A & B instead of
touching A & D.
Surface interval
time appears
when activated
from Surface
Mode