Company Ltd Instruction manual Blood Pressure Monitor TM-2655/TM-2655P

3
1. INTRODUCTION
1-1 Features
The TM-2655/TM-2655P is a blood pressure monitor that measures systolic and diastolic blood pressure
and pulse. The TM-2655 is a standard model; the TM-2655P is equipped with a printer unit. The features
of the devices are as follows:
COMPACT DESIGN
Due to its compactness, the TM-2655/TM-2655P can be installed in an area where space is limited.
You can measure your blood pressure on either arm.
AUTOMATIC-CUFF SYSTEM / AUTOMATIC-EXHAUST-ADJUSTMENT SYSTEM
The arm cuff is wrapped around the arm by pressing the START/STOP switch and deflation speed is
automatically controlled. No special adjustment is required. All you have to do is insert your arm into the
arm insertion section to the shoulder and press the START/STOP switch. The rest is done automatically.
You can easily and quickly measure your blood pressure. The TM-2655/TM-2655P is suitable for mass
medical check-ups at firms and sports facilities and in hospital waiting rooms when used for a pre-check
of the patient’s health status.
BUILT-IN PRINTER (TM-2655P only)
The TM-2655P is equipped with a printer unit, which allows measurement results to be printed out for
record keeping. The print format can be selected from results only, results with pulse pressure graph or a
list of the results.
BUILT-IN CLOCK
The date and time of measurement can be printed along with the measurement results.
COUNTER (UP TO 999999 COUNTS)
The counter indicates how often the device is used. It can be a helpful guideline for maintaining the
device.
SAFETY SYSTEM
The TM-2655/TM-2655P adopts an emergency stop system. In case of emergency, pressing the
EMERGENCY STOP switch will release the air in the arm cuff so that the arm can be removed easily.
This system also functions if there is a power failure.
REPLACEABLE ARM CUFF COVER
The arm cuff cover can be easily replaced.