Company Ltd Instruction manual Blood Pressure Monitor TM-2655/TM-2655P

Fig.17 Cable connection diagram

9. MAINTENANCE

9-1 Replacing the Arm Cuff Cover

Replace the arm cuff cover as follows:

1. Locate the cover at the bottom of the arm insertion section.

Slide the cover downward to open it. The screw is exposed.

Using the screwdriver, loosen the screw and remove the front

frame.

2. Remove the four screws on the rear panel to remove the

armrest and the rear panel.

3. Remove the front vinyl ring of the arm cuff cover from the

groove. Remove the rear vinyl ring of the arm cuff cover from

the groove. Pull out the arm cuff cover.

4. Place a new arm cuff cover in the arm cuff. Secure the front

and rear vinyl rings of the arm cuff cover in the groove.

Smooth the cover cloth near the grooves.

5. Replace the rear panel, the armrest, and the front frame in the

reversed order of removal. Slide the cover upward to secure it

in position.

Note

The arm cuff cover is a consumable. Purchase it separately.

Fig.18 Arm cuff replacing procedure