Blood Pressure Monitor User Manual

English 6

Using The Monitor

Attaching The Arm Cuff

1. Wrap the cuff around the upper

arm, about 2 - 3 cm above the

elbow, as shown. Place the cuff

directly against the skin, as

clothing may cause a faint pulse,

and result in a measurement error.

2. Constriction of the upper arm,

caused by rolling up a shirtsleeve,

may prevent accurate readings.

3. Confirm that the index points

within the proper fit range.

How To Take Proper Measurements

For the most accurate blood

pressure measurement:

Sit comfortably at a table.

Rest your arm on the table.

Relax for about five to ten minutes

before measurement.

Place the center of the cuff at the same height as your heart.

Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or

thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be

alarmed)

After Measurement

After measurement, press the START button to turn off the power.

Remove the cuff and record your data.

Note: The device has an automatic power shut-off function, which turns the

power off approximately one minute after measurement.

Allow at least ten minutes between measurements on the same person.

Rolling up shirtsleeve

2 -3 cm

Constriction of the U

Air Hose

Cuff

Index

and Proper fit range