Fit it & Forget it Water Heater EWSH 15 & 25 Litres Why people prefer an A. O. Smith water heater... ADVANCED TECHNOLOGY Double coated glass lined tank. Maximum protection against hard water and corrosion. SUPERIOR QUALITY EXCELLENT SERVICE Get the best quality that ensures you have a water heater that works in Indian water conditions. Guaranteed* A. O. Smith Service within 24 hours. Call: 1.800.103.2468 ENERGY SAVING MADE BETTER BEE 5 star rating.
Congratulations! And welcome to the A. O. Smith family. We would like to thank you for the trust you have shown in choosing an A. O. Smith water heater. You can be sure it will live up to your expectations. Thousands of delighted users all over the world trust A. O. Smith water heaters for their families. This user guide will introduce you to your water heater. Follow the instructions carefully and look forward to enjoying long years of trouble-free service. A. O.
What's in the box? User Guide Electric Water Heater Wall Mounting Accessories ter Hea Litres Water 15 & 25 EWSH & Fit itge For t it Why people prefer an T SERVICE EXCELLEN * A. O. Smith .. water heater. A. O. Smith SUPERIOR QUALITY that quality best water Get the you have a ensures that works in heater conditions. water Indian D ADVANCE OGY glass lined TECHNOL coated protection Double and tank. Maximum hard water against corrosion. MADE SAVING of ENERGY rating. One 5 star efficient 24 hours.
User Instructions Please read the instructions carefully before the installation or operation of the water heater. This user guide is meant for your future reference and is applicable for the following models. EWSH 15 EWSH 25 EWSH 15 - LHS EWSH 25 - LHS Please refer the invoice or the product nameplate for identifying the model name. Please follow the instructions accordingly. • Only A. O. Smith recommended professional installers will install the A. O. Smith water heater for you.
Specifications For Right Hand Side Inlet Outlet Models Model EWSH 15 EWSH 25 Volume [L] 15 25 Power [W] 2000 2000 ~230/50 ~230/50 Actual Stdg. Loss [kWh/24h/45°C diff.] Voltage/Frequency [V/Hz] 0.525 0.672 Max. Stdg. Loss [kWh/24h/45oC diff.] [as per IS 2082:1993 amended in 2002] 1.138 1.
Dimensions and Part Descriptors Model EWSH - 15 F 4 EWSH - 25 A1 [mm] 628 908 A2 [mm] 641 921 B [mm] 80 80 C [mm] 310 310 D [mm] 167 247 E [mm] 260 380 3 9 Part Descriptors 1 Outlet 2 Inlet 3 Thermostat Knob 4 Red Cap 5 Blue Cap 6 Jacket 7 Left Cover 8 Right Cover 9 Service Cover 10 Anode 11 Heating Element 12 Tank 13 PU Insulation 14 EPS Insulation 15 Thermal Cutout 16 Installation Bracket 5 8 F A1 B C A2 7 6 E D 16 16 11 15 1 2 14 12 13
Dimensions and Part Descriptors Model EWSH 15 - LHS EWSH 25 - LHS A1 [mm] 628 908 A2 [mm] 641 921 B [mm] 80 80 C [mm] 310 310 D [mm] 167 247 E [mm] 260 380 F 4 3 1 Outlet 2 Inlet 3 Thermostat Knob 4 Red Cap 5 Blue Cap 6 Jacket 7 Left Cover 8 Right Cover 9 Service Cover 10 Anode 11 Heating Element 12 Tank 13 PU Insulation 14 EPS Insulation 15 Thermal Cutout 16 Installation Bracket 9 F 8 5 Part Descriptors A1 C B A2 6 7 E D 16 16 11 15 1 2 1
Key Features Glass Coated Element Scale and sediment build-up on the surface of the element can lead to premature failure. A. O. Smith Glass Coating helps to prevent scale formation and extends the life of the heating element. Double Coated Inner Tank Double coating of the glass lining increases glass thickness and ensures good glass coverage, thus reducing the risk of tank steel corrosion.
Installation Mounting Fig. 1A Position for installation Fig. 2 Wall mounting bracket A 400 mm RHS Ceiling Wall 400 mm Model A (mm) EWSH 15 260 EWSH 15 - LHS EWSH 25 Water heater Fig. 1A Applicable for models EWSH 15 and EWSH 25 Fig. 1B Position for installation Fig. 3 Installation of wall mounting bracket 400 mm LHS Wall 400 mm 380 EWSH 25 - LHS 90 Ceiling Expansion tube Screw Hanger Water heater Fig. 1B Applicable for models EWSH 15 - LHS and EWSH 25 - LHS Fig.
Conversion From Wall Mounting Installation To Floor Mounting Step 1: Factory default installation (wall hung) Step 2: Unscrew the four bolts, and remove the two brackets Step 3: Turn 90 degrees and remove four paper disks Step 4: Place the paper disks to cover the holes on the jacket Step 5: Use four screws (accessories) to fix the two brackets in place Step 6: Assembly finished depiction Warning: The water heater comes with default wall hung installation.
Fig. 5A Installation diagram RHS Red Cap Safety Valve Lever *Flexible Hose Blue Cap Discharge Tube To Drain Fig. 5A Applicable for models EWSH 15 and EWSH 25 Hot Water Tap Cold Water Tap Fig. 5B Installation diagram LHS Red Cap Safety Valve Lever *Flexible Hose Blue Cap Discharge Tube To Drain Hot Water Tap Cold Water Tap Fig. 5B Applicable for models EWSH 15 - LHS and EWSH 25 - LHS *Flexible Hoses to be procured by the customer, not part of standard product.
Plumbing 1. Make necessary plumbing with reference to the installation diagram (Fig. 5). 2. A. O. Smith recommends nylon/SS braided hoses having a minimum pressure rating of 8 Bar and hoses should be compatible for hot water applications. 3. Connect the cold water pipe to the inlet [Blue Cap]. 4. Connect the hot water pipe to the outlet [Red Cap]. 5. Attach the discharge tube to safety valve as shown in installation diagram (Fig. 5A & Fig. 5B).
Fig. 6A Safety valve Fig. 6B Safety valve RHS LHS Directions for use Caution: • Before using the water heater, make sure the inner tank is completely filled with water and the power plug has been connected properly. • Operating the water heater with insufficient or no water may result in permanent damage to the water heater and may cause damage to the property and injuries to the users. 1. Switch on the water heater’s power supply. The green indicator light glows. 2.
Troubleshooting Problem Possible Cause(s) Solution • Green and Red light off No power to heater Turn on electrical switch.
Warranty Product warranty Your A. O. Smith water heater is warranted against defects arising from faulty design, workmanship and materials for a period of 24 months from the date of the invoice, subject to the following conditions: 1.
General Terms of Warranty 1. The “goods” shall mean the goods described in the purchase agreement. 2. “The customer” shall mean the original purchaser under the purchase agreement. 3. “The Company” shall mean A. O. Smith India Water Heating Pvt. Ltd. 4. The “Purchase Agreement” shall mean the General Terms and Conditions of Sale agreed upon by the customer and the Company as printed on the Invoice. 5.
Warranty Card Warranty Card (Customer Copy) (To be retained by the Customer) Unit Serial Number: Invoice Number: Dated: Customer's Name and Address: Model: Capacity: Dealer’s Stamp and Signature Warranty Card Warranty Card (Company Copy) (To be sent back to the Company) Unit Serial Number: Invoice Number: Dated: Customer's Name and Address: Model: Capacity: Dealer’s Stamp and Signature 14
Service and Maintenance For Service needs: Please contact our A. O. Smith Toll Free Customer Care Centre Helpline at 1.800.103.2468 E-mail ID: aosmithcs@hotwater.com Registered Office A. O. Smith India Water Heating Private Limited Plot No. 300, Phase-2, KIADB Industrial Area, Harohalli, Kanakapura Taluk, Ramanagara District - 562 112, Karnataka, India. Toll Free No.: 1.800.103.2468 Website: www.aosmithindia.
Manufactured by A. O. Smith India Water Heating Private Limited Plot No. 300, Phase-2, KIADB Industrial Area, Harohalli, Kanakapura Taluk, Ramanagara District - 562 112, Karnataka, India. Toll Free: 1.800.103.2468 Website: www.aosmithindia.