Quick Start Guide

Below we simply refer to external devices that are to be charged as “receivers”, as they
receive the charging voltage and current from the “donor” smarT.power.
Basic operation:
(4) Charging the receiver (e.g. smartphone or TEASI):
Press the ON / OFF switch (4) 1x: smarT.power starts to charge the receiver
Pressing the ON / OFF switch (4) again stops the charging process.
(3) Spotlight functions:
Press 1x: switches on LED spotlight: while light, full power
Press 2x: white LED, approx. half strength
Press 3x: red light
Press 4x: switches off LED spotlight
If the switch (3) is not pressed again within 5 seconds to change to the next LED mode,
the next time the switch (3) is pressed, all LED functions are switched off immediately.
Manual - SMART power RZ EN_Layout 1 23.01.14 14:50 Seite 3