Quick Start Guide

as soon as possible. If you do this, please indicate that your smarT.power has fallen into
water! Never open the device yourself! Lithium batteries are subject to special safety re-
gulations!
To clean the device, it is best to use a soft cloth, which should be lightly damp at most.
Never use water or a damp cloth to clean the electrical ports (5) and (8)!
Do not recharge smarT.power or connect it to an external power source in the rain,
as the charging socket is only waterproof when the rubber cover is securely closed.
The adapter port (5) for receiver devices should be stored in the designated recess for
safekeeping when not in use. Otherwise the port itself is not protected against water and
dust.
If an appropriate adapter (see below - e.g. mini USB for TEASI) is plugged into the port
(5) and the adapter has been inserted correctly, this connection is waterproof and dust-
proof. However you should never change or plug in the adapter in the rain or, for example
on the beach in the wind. If water or sand/dust penetrates inside, this can lead to short-
circuits or mechanical damage. These are not covered by the warranty.
Manual - SMART power RZ EN_Layout 1 23.01.14 14:50 Seite 6