Owner's manual

LCD Display FOX-12D
Chapter 2 Hardware Installation 2-7
VESA Mounting Holes
To mount the LCD Display onto a monitor arm or wallmount plate,
please follow the steps below.
Step 1: Line up the threaded holes on the rear panel of the monitor
with the screw holes on the monitor arm or wallmount plate.
Step 2: Secure the monitor to the arm or stand with the retention
screws supplied with the monitor arm or stand.
2.7 Waterproof LAN Connector Installation
When you connect the LAN port with the Ethernet cable, please use
the particular Waterproof LAN connector in the packing. If the
Ethernet cable without the particular waterproof LAN connector, it
may cause the issues of LAN connection-missing or invalid
waterproof function. Please follow the steps to install the waterp
LAN connect
roof
or.
Step 1: Peel off the release paper of gasket of RJ-45 plug cable set
and stick it to its body